fbpx

914K Compact Wheel Loader

Overview

The Cat® 914K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

914K Compact Wheel Loader - Specifications

Engine
Maximum Gross Power
100 HP
75 kW
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - Maximum Engine Speed
2350 r/min
2350 r/min
Maximum Gross Torque - SAE J1995
306 lb/ft
415 N·m
Engine Model
Cat C4.4
Bore
4.13 in
105 mm
Displacement
268 in³
4.4 l
Maximum Gross Power - ISO 14396 (DIN)
102 HP
75 kW
Emissions
Engine meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA.
Maximum Gross Power - ISO 14396
100 HP
75 kW
Maximum Gross Power - SAE J1995
102 HP
76 kW
Rated Net Power - ISO 9249
99 HP
74 kW
Stroke
5 in
127 mm
Maximum Gross Torque - ISO 14396
302 lb/ft
410 N·m
Rated Net Power - ISO 9249 (DIN)
101 HP
74 kW
Rated Net Power - SAE J1349
98 HP
73 kW
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Weights
Operating Weight
18884 lb
8568 kg
Buckets
Bucket Capacities
1.6-3.5 m3 (2.1-4.6 yd3)
Note
Various capacities not available in all regions.
General Purpose
1.6-1.9 m3 (2.1-2.5 yd3)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard.
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
40.7 gal (US)
154 l
Axles - Rear Center Differential
2 gal (US)
7.5 l
Transmission
0.9 gal (US)
3.4 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Hydraulic Tank
14.5 gal (US)
55 l
Engine Crankcase
2.4 gal (US)
9 l
Axles - Front Center Differential
2 gal (US)
7.5 l
Steering
Maximum Flow - Steering Pump
22 gal/min
82 l/min
Steering Cycle Times - Lock to Lock - At 2,350 rpm
2.8 s
2.8 s
Maximum Working Pressure - Steering Pump
3263 psi
22500 kPa
Number of Steering Wheel Turns - Lock to Lock
3.75 turns
Steering Articulation Angle - Each Direction
40 °
40 °
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - ISO 9249
299 lb/ft
405 N·m
Maximum Net Torque - SAE J1349
295 lb/ft
400 N·m
Loader Hydraulic System
Hydraulic Cycle Time - Maximum Engine Speed - Dump, at Maximum Reach
1.4 s
1.4 s
Hydraulic Cycle Time - Maximum Engine Speed - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Maximum Flow - Implement Pump
39 gal/min
148 l/min
Maximum Working Pressure - Implement Pump
4061 psi
28000 kPa
Hydraulic Cycle Time - Maximum Engine Speed - Rack Back
2.2 s
2.2 s
Hydraulic Cycle Time - Maximum Engine Speed - Total Cycle Time
12.5 s
12.5 s
Relief Pressure - Tilt Cylinder
4931 psi
34000 kPa
Maximum Flow - Implement Pump - 3rd* Function, Maximum Flow, Standard
24 gal/min
90 l/min
Relief Pressure - Tilt Cylinder - 3rd* Function Maximum Working Pressure
3046 psi
21000 kPa
Hydraulic Cycle Time - Maximum Engine Speed - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Transmission
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h
20 km/h
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
10 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Tires
Note (1)
Tire options may vary by region. Contact your Cat dealer for details.
Standard Size
17.5-25 16 PR (L-3)
Other Choices Include
17.5-25 12 PR (L-2), 1PC Rim; 17.5-25 12 PR (L-3), 1PC Rim; 17.5R-25, radial (L-3), 1 or 3PC Rim
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (standard)